Order Products : sales@su-jiao.com
DynaPath™ 267NL
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaPath™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ycCgfY_DynaPath-267NL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Conductive PE Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.00 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 - 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 20 | % | ASTM D638 |
| Flexural Modulus | 248 | MPa | ASTM D790 |
| Flexural Strength | 8.27 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 210 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+6 | ohms | ASTM D257 |
| Volume Resistivity | < 1.0E+6 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 48.9 - 60.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 177 - 191 | °C | |
| Middle Temperature | 182 - 196 | °C | |
| Front Temperature | 188 - 202 | °C | |
| Nozzle Temperature | 193 - 210 | °C | |
| Processing (Melt) Temp | 193 - 210 | °C | |
| Mold Temperature | 26.7 - 48.9 | °C | |
| Injection Pressure | 34.5 - 55.2 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.345 - 0.689 | MPa | |
| Screw Speed | 40 - 70 | rpm | |
| Clamp Tonnage | 2.8 - 5.5 | kN/cm² |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 48.9 - 60.0 | °C | |
| Drying Time | 2.0 | hr | |
| Cylinder Zone 1 Temp. | 177 - 191 | °C | |
| Cylinder Zone 3 Temp. | 182 - 196 | °C | |
| Cylinder Zone 5 Temp. | 188 - 202 | °C | |
| Melt Temperature | 193 - 210 | °C | |
| Die Temperature | 193 - 210 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 25 to 100 RPM |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SIBUR PP H250 GP/2 | SIBUR, LLC | PP Homopolymer | SIBUR PP |
| CP PRYME® Polycarbonate PC100RUL-10M BK | Chase Plastics Services Inc. | PC | CP PRYME® Polycarbonate |
| Ferro PP CPP30GF14BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| PC-ABSCOM™ B1000 | Polymer Compounders Limited | PC+ABS | PC-ABSCOM™ |
| Kinta HI5603 | Kinta Technology (Hong Kong) Co., Ltd. | PC+ABS | Kinta |
