Order Products : sales@su-jiao.com
BCC Resins BC 5200
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yYRaZI_BCC-Resins-BC-5200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BC 5200 is a medium viscosity fast gelling two part Epoxy Adhesive System. With an easy to use 1 to 1 mix ratio, BC 5200 is considered an excellent general purpose adhesive for in-shop use. BC 5200 will bond to wood, concrete, select plastics, and most metal surfaces. Surface Preparation: Areas to be adhered to should be clean and dry, free of dust, oil, and release agents. It is advisable to scarify the surface with sand paper prior to application. Mixing Instructions: Combine 1 part of Resin to 1 part of Hardener by weight or by volume. Setting time is 4 to 4.5 minutes. May be applied by any reasonable thickness by spreading or splining. Do not work with more material than can be applied in 4 minutes. Surfaces should be held in position until cure is affected.p |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 53.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.5 | % | ASTM D638 |
| Compressive Strength | 67.6 | MPa | ASTM D695 |
| Shear Strength | 19.3 | MPa | ASTM D732 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 1.0, Mix Ratio by Volume: 1.0 | ||
| Resin | Mix Ratio by Weight: 1.0, Mix Ratio by Volume: 1.0 | ||
| Pot Life (24°C) | 4.0 to 4.5 | min | |
| Thermoset Mix Viscosity (24°C) | 13000 | cP | ASTM D2393 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene HP521-00UV | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| WanBlend® WHT-1170M | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | WanBlend® |
| BESTPOLUX PCA85/01 | Triesa Plastics | PC+ABS | BESTPOLUX |
| O'Tech OF 6532 | O'Tech Corporation | PVC, Unspecified | O'Tech |
| Durethan® BKV 25 H2.0 LT 904040 | LANXESS GmbH | Nylon 6 | Durethan® |
