Order Products : sales@su-jiao.com
Formolene® HB5202B
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yYPNzY_Formolene-HB5202B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® HB5202B is designed for applications requiring excellent stiffness and stress crack resistance properties. It may be used as a blow molding resin or sheet extrusion thermoforming resin. Formolene® HB5202B meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| Compression Molded, F50 | 50.0 | hr | ASTM D1693B |
| 100% Igepal, Compression Molded, F50 | 50.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 26.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 600 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1310 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ HDPE DGDC-2100 NT 7 | The Dow Chemical Company | HDPE | DOW™ HDPE |
| AVALON® 75 ABX | Huntsman Corporation | TPU-Polyester | AVALON® |
| Epoxies, Ect. 60-7108 | Epoxies, Etc. | Acrylic, Unspecified | Epoxies, Ect. |
| PLUSTEK PB340S50 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| VALOX™ V4860HR resin | SABIC Innovative Plastics | PBT | VALOX™ |
