Order Products : sales@su-jiao.com

Mirakutoran® TPU K25MPSJW

Category:	TPU Alloy , Thermoplastic Polyurethane Elastomer Alloy
Manufacturer:	Japan Mirakutoran Inc.
Trademark:	Mirakutoran® TPU
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yXqyXA_Mirakutoran-TPU-K25MPSJW.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Our TPU "Mirakutoran ®" has the following outstanding features.

Has excellent wear resistance

Tensile strength, high mechanical strength and tear strength

Is a wide range of hardness

High impact strength

Oil resistance and good chemical resistance

Excellent low temperature properties, weather resistance, ozone resistance and is also good

Flexible rubber elastic, vibration-effective silencing

Compared to other urethane elastomer thermoplastic that is more

Playback can be processed

Vulcanization process without curing reaction, very high productivity

Resins and other polymer is easy

Solution is easily dissolved in solvent process

Mirakutoran to the standard type E and P are two types.

Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure

General Information
Features	Low compressive deformability Shock absorption Impact resistance, good Good strength Good flexibility Good tear strength Ozone resistance Low temperature resistance Good chemical resistance Good wear resistance Good weather resistance Heat resistance, high Oil resistance

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.25	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 23°C, 2.00mm, injection molding)	93 - 97		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% strain, 23°C, 2.00mm)	7.80	MPa	ASTM D412
Tensile Strength ²(Yield, 23°C, 2.00 mm)	29.0	MPa	ASTM D412
Tensile Elongation ³(Break, 23°C, 2.00 mm)	500	%	ASTM D412
Tear Strength ⁴(23°C, 2.00 mm)	98.0	kN/m	ASTM D624

Electrical	Nominal Value	Unit
Volume Resistivity (23°C, 2.00 mm)	1.0E+4	ohms·cm

Additional Information
Test Methods: JIS K7311, K6262, K7206

Note Message
1 .	300 mm/min
2 .	300 mm/min
3 .	300 mm/min
4 .	300 mm/min

Resin Grade	Manufacturer	Category	Trademark
ULTEM™ 2100F resin	SABIC Innovative Plastics Europe	PEI	ULTEM™
ADEKA ED-503G	Adeka Corporation	Epoxy	ADEKA
BCC Resins HPX-825	BCC Products Inc.	TS, Unspecified	BCC Resins
Forprene® 6NE901A90	SO.F.TER. SPA	TPV	Forprene®
LNP™ LUBRICOMP™ RFG16 compound	SABIC Innovative Plastics Europe	Nylon 66	LNP™ LUBRICOMP™