Order Products : sales@su-jiao.com
Andur 1-83 AP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yXh9bR_Andur-1-83-AP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 1-83 AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 83-85 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 1-83 AP with polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 84 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 4.69 | MPa | ASTM D412 |
| 300% strain | 8.27 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 31.7 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 550 | % | ASTM D412 |
| Bayshore Resilience | 56 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 8.0 - 11 | min | |
| Demold Time | 30 | min | |
| Post Cure Time (96°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 83 to 85Die C Tear, ASTM D1004: 350 pliAverage Split Tear, ASTM D1938: 70 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 1-83 AP: 160-180°F Curene 442: 230-240°F |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 100 - 113 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAISOX 9001 | Formosa Plastics Corporation | HDPE | TAISOX |
| VICTREX® ST™ ST45CA30 | Victrex plc | PEKEKK | VICTREX® ST™ |
| COPYLENE® CM005 | Phillips 66 | PP Impact Copolymer | COPYLENE® |
| EGYPTENE HD 5211 EA | Sidpec (Sidi Kerir Petrochemicals Co.) | HDPE | EGYPTENE |
| Petrothene® GA672962 | LyondellBasell Industries | HDPE | Petrothene® |
