Order Products : sales@su-jiao.com
Generic PC - Glass Fiber, Milled
| Category: | PC , Polycarbonate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yWeZ4p_Generic-PC---Glass-Fiber-Milled.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PC - Glass Fiber, Milled This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 - 1.42 | g/cm³ | ASTM D792 |
| Molding Shrinkage | |||
| Flow : 23°C | 0.30 - 0.51 | % | ASTM D955 |
| 23°C | 0.33 - 0.76 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 3430 - 3820 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 3.0 - 28 | % | ASTM D638 |
| Flexural Modulus (23°C) | 3070 - 3450 | MPa | ASTM D790 |
| Flexural Strength | |||
| 23°C | 68.9 - 124 | MPa | ASTM D790 |
| 23°C | 50.0 - 132 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 79 - 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 1100 - 1300 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 127 - 138 | °C | ASTM D648 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index | 956 - 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 299 - 316 | °C | |
| Front Temperature | 316 - 327 | °C | |
| Mold Temperature | 93.3 - 96.3 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PC - Glass Fiber, MilledThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN ANC120 | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| Trilliant™ HC HC5420-0002 LL Natural | PolyOne Corporation | Polyolefin, Unspecified | Trilliant™ HC |
| Bayflex® 906 (29 pcf) | Covestro - PUR | PUR-MDI | Bayflex® |
| TOTAL Polystyrene Compound 881 | TOTAL Refining & Chemicals | PS (HIPS) | TOTAL Polystyrene |
| LEXAN™ LS2 resin | SABIC Innovative Plastics | PC | LEXAN™ |
