Order Products : sales@su-jiao.com

Texalan® 5 Series 564D

Category:	TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester)
Manufacturer:	Austin Novel Materials Co. Ltd.
Trademark:	Texalan® 5 Series
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yW4e6w_Texalan-5-Series-564D.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Texalan® 5 Series 564D is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific, Europe, or North America for blow molding, calendering, coextrusion, extrusion, film extrusion, or injection molding.

Important attributes of Texalan® 5 Series 564D are:

Chemical Resistant

High Strength

Impact Resistant

Low Temperature Resistant

Wear Resistant

General Information
Features	Good Abrasion Resistance High Elasticity High Impact Resistance High Tensile Strength Low Temperature Resistant Oil Resistant
Processing Method	Blow Molding Calendering Coextrusion Extrusion Film Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.15 to 1.19	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	61 to 67		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Abrasion Resistance	< 50.0	mm³	ISO 4649

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ISO 37
100% Strain	> 23.0	MPa
300% Strain	> 35.0	MPa
Tensile Stress (Yield)	> 52.0	MPa	ISO 37
Tensile Elongation (Break)	> 380	%	ISO 37
Tear Strength	> 60	kN/m	ISO 34-1
Compression Set (70°C)	< 43	%	ISO 815

Resin Grade	Manufacturer	Category	Trademark
Boda BDT-KR3702	Chenguang Fluoro & Silicone Elastomers Co., Ltd.	Fluorelastomer	Boda
Ebalta MG 815-1 / MG 815	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
Kepital® FM2020	Korea Engineering Plastics Co., Ltd	Acetal (POM) Copolymer	Kepital®
LITEN FB 29 F	Unipetrol RPA, s.r.o.	PE Copolymer	LITEN®
SD POLYCA™ PCX-3655	Sumika Styron Polycarbonate Limited	PC Alloy	SD POLYCA™