Order Products : sales@su-jiao.com
Generic PP Copolymer - Mica
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yNwGRI_Generic-PP-Copolymer---Mica.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP Copolymer - Mica This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 - 1.25 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.8 - 19 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 0.40 - 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 39 - 55 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 1100 - 4830 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 15.0 - 24.4 | MPa | ASTM D638 |
| Fracture, 23°C | 13.0 - 18.2 | MPa | ASTM D638 |
| 23°C | 20.0 - 31.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 23°C | 2.0 - 5.0 | % | ASTM D638 |
| Fracture, 23°C | 3.0 - 17 | % | ASTM D638 |
| Flexural Modulus (23°C) | 1450 - 3280 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 21.0 - 41.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 32 - 150 | J/m | ASTM D256 |
| Dart Drop Impact (23°C) | 0.565 - 4.16 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 74.4 - 132 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 54.2 - 88.5 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 73.9 - 74.3 | °C | |
| Drying Time | 1.5 | hr | |
| Suggested Max Moisture | 0.050 - 0.054 | % | |
| Rear Temperature | 207 - 222 | °C | |
| Middle Temperature | 213 - 219 | °C | |
| Front Temperature | 217 - 225 | °C | |
| Nozzle Temperature | 215 - 228 | °C | |
| Mold Temperature | 37.6 - 38.1 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP Copolymer - MicaThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tru-Bond™ PB 950 | Devcon | Acrylic, Unspecified | Tru-Bond™ |
| Ultramid® A3WG3 | BASF Corporation | Nylon 66 | Ultramid® |
| AZDEL™ C401-B01 | Azdel, Inc. | PP, Unspecified | AZDEL™ |
| Epocast 1626 A/B | Huntsman Advanced Materials | Epoxy | Epocast |
| HiFill® PA6/6 GB25 L BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
