Order Products : sales@su-jiao.com

AMPLIFY™ TY 1250H

Category:	MAH-g , Functional Polymer
Manufacturer:	The Dow Chemical Company
Trademark:	AMPLIFY™ TY
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yNgRKC_AMPLIFY-TY-1250H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
AMPLIFY™ TY Functional polymers are maleic anhydride grafted (MAH) polyolefins which are designed for the tie layer market segment. AMPLIFY TY 1250H is a high melt strength polymer with a high grafting level and is ideal for use in a blend where high melt strength, high adhesion to polar substrates, and toughness are desired properties. This grade is further designed to perform in the harsh extrusion conditions used in producing an extruded multi-layer construction. Main Characteristics: Strong adhesion to many polar substrates Excellent physical properties High melt strength Wide range of process and service temperature Low gels to ensure minimal defects Complies with: U.S. FDA 21 CFR 177.1520(c)6 Consult the regulations for complete details.

Message

AMPLIFY™ TY Functional polymers are maleic anhydride grafted (MAH) polyolefins which are designed for the tie layer market segment. AMPLIFY TY 1250H is a high melt strength polymer with a high grafting level and is ideal for use in a blend where high melt strength, high adhesion to polar substrates, and toughness are desired properties. This grade is further designed to perform in the harsh extrusion conditions used in producing an extruded multi-layer construction.

Main Characteristics:

Strong adhesion to many polar substrates

Excellent physical properties

High melt strength

Wide range of process and service temperature

Low gels to ensure minimal defects

Complies with:

U.S. FDA 21 CFR 177.1520(c)6

Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 177.1520(c) 6
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Density	0.921	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.50	g/10 min	ASTM D1238
MAH Graft Level ¹	High		Internal method

Optical	Nominal Value		Test Method
Yellowness Index - (Pellets)	2.30		ASTM D2457

Extrusion	Nominal Value	Unit
Melt Temperature	182 - 232	°C

Extrusion instructions
Fabrication Conditions for Multi-layer Pipe Applications are not defined at this time.

Note Message
1 .	Maleic Anhydride level is defined as Low: <0.25 wt%, Medium 0.25-0.5 wt%, High >0.5 wt% MAH

Resin Grade	Manufacturer	Category	Trademark
RAMLLOY PA917G6	Polyram Ram-On Industries	Nylon 66+PP	RAMLLOY
TRIREX® Compound FB3025G10	Samyang Corporation	PC	TRIREX® Compound
Andur 90-AP/Curene® 185	Anderson Development Company	PUR-Ether/TDI	Andur
Dynaflex™ G7960-9001-02	PolyOne Corporation	TPE	Dynaflex™
Geon™ Vinyl Flexible 90067	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible