Order Products : sales@su-jiao.com
Badatron® PPS GF30 TF/SIM15
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Bada AG |
| Trademark: | Badatron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yCvm76_BadatronPPSGF30TFSIM15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% glasfibres filled tribological injection moulding grade; Low friction and wear at high high service temperature |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.62 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 11500 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C) | 160 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 1.7 | % | ISO 527-2/5 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 1(23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 2(1.8 MPa, Unannealed, 4.00 mm) | 270 | °C | ISO 75-2/A |
| Melting Temperature (DSC) 3 | 295 | °C | ISO 3146 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.8 mm | V-0 | UL 94 | |
| 1.6 mm | V-0 | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 0.75 mm | 960 | °C | IEC 60695-2-12 |
| 1.6 mm | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | ||
| 0.75 mm | 960 | °C | IEC 60695-2-13 |
| 1.6 mm | 960 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 140 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Processing (Melt) Temp | 300 - 340 | °C | |
| Mold Temperature | 140 - 180 | °C |
| Note Message | |
|---|---|
| 1 . | 80x10x4 mm |
| 2 . | 110x10x4 mm |
| 3 . | Compound for molding, 10k/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wanthane® WHT-1295 | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| NuSil MED-2955 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| Diakon® CLH374 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| OmniPro™ CPP CCF10 | OMNI Plastics, LLC | PP Copolymer | OmniPro™ |
| POLYfill PPHC T15020 | Polykemi AB | PP, Unspecified | POLYfill |
