Order Products : sales@su-jiao.com
Sasol Polymers PE HM440
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Sasol Polymers |
| Trademark: | Sasol Polymers PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y529Sz_Sasol-Polymers-PE-HM440.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
Applications
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal CO-630, F50) | > 50.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 56 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 15.0 | MPa | ASTM D638 |
| Fracture | 18.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 890 | % | ASTM D638 |
| Flexural Modulus | 434 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 97.0 | °C | ASTM D1525 |
| Impact test (-40°C) | 200 | J/cm | ASTM D3029 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 140 - 170 | °C | |
| Middle Temperature | 150 - 180 | °C | |
| Front Temperature | 160 - 190 | °C | |
| Nozzle Temperature | 180 - 200 | °C | |
| Processing (Melt) Temp | 180 - 250 | °C |
| Injection instructions |
|---|
| Zone 4: 170 to 200°C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EP6004 | HMC Polymers | PP Impact Copolymer | Moplen |
| Fluon® ETFE Film | Asahi Glass Co., Ltd. | ETFE | Fluon® |
| Elastron® G G100.A65.N | Elastron USA, Inc. | SEBS | Elastron® G |
| POLYFLON™ M-15 | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
| GELOY™ HRA222F resin | SABIC Innovative Plastics Europe | ASA+PC | GELOY™ |
