Order Products : sales@su-jiao.com

Addisil™ 8101

Category:	Silicone , Silicone
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Addisil™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	y4u5Z8_Addisil-8101.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Addisil 8101 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Addisil 8101 is a grey thixotropic material Key Features and Benefits One component product - no mixing required Room temperature storage Very fast cure at elevated temperature (in a range of 110°C to 230°C) Primerless adhesion to many types of substrates (e.g. PBT, PA, phenolic resins, copper, nickel, aluminum, stainless steal, brass, ceramic and glass) No formation of cure by-products; low linear shrinkage Non-corrosive to metals and sensitive substrates Excellent dielectric properties Outstanding performance over a wide temperature range Service temperature -50°C to 250°C

Message

Addisil 8101 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.

Addisil 8101 is a grey thixotropic material

Key Features and Benefits

One component product - no mixing required

Room temperature storage

Very fast cure at elevated temperature (in a range of 110°C to 230°C)

Primerless adhesion to many types of substrates (e.g. PBT, PA, phenolic resins, copper, nickel, aluminum, stainless steal, brass, ceramic and glass)

No formation of cure by-products; low linear shrinkage

Non-corrosive to metals and sensitive substrates

Excellent dielectric properties

Outstanding performance over a wide temperature range

Service temperature -50°C to 250°C

General Information
Features	Bondability Fast Cure Good Adhesion Heat Cure Low Shrinkage Non-Corrosive Thixotropic
Uses	Adhesives Sealants
Appearance	Grey

Thermoset	Nominal Value	Unit	Test Method
Shelf Life (< 27°C)	> 17	wk

Uncured Properties	Nominal Value	Unit
Density	1.09	g/cm³
Viscosity	160 to 650	Pa·s
Curing Time (175°C)	0.17	hr

Cured Properties	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	43
Tensile Strength	9.20	MPa
Tensile Elongation at Break	580	%
Electric Strength (2.00 mm)	27	kV/mm	DIN 53481
Relative Permittivity (50 Hz, 1.00 mm)	2.94		DIN 53483
Volume Resistivity (1.00 mm)	2.1E+13	ohms·cm	DIN 53481
Dissipation Factor (50 Hz, 1.00 mm)	1.8E-3		DIN 53483

Resin Grade	Manufacturer	Category	Trademark
RTP 4081 TFE 5	RTP Company	PPA	RTP
STYRON™ 666H	Trinseo	PS (GPPS)	STYRON™
LNP™ THERMOCOMP™ RF004XXD compound	SABIC Innovative Plastics	Nylon 66	LNP™ THERMOCOMP™
PERCOM® FBH16FR	A. Schulman Europe	PP, Unspecified	PERCOM®
SQUARE® LIM1939-40AF4/BF4	Shenzhen SQUARE Silicone Co., Ltd.	Silicone Rubber, LSR	SQUARE®