Monprene® SP-19985 XRD1 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene SP-19985 XRD1 is a high performance thermoplastic elastomer designed for a variety of consumer sporting goods applications including playground flooring requiring a soft, rubber-like feel. Monprene SP-19985 XRD1, available in NAT and colors, is a high hardness, medium density, UV stabilized grade that exhibits excellent abrasion resistance and is suitable for injection molding.

General Information
Features	Sunlight Resistant smoothness Light stabilization Good UV resistance Good coloring Good wear resistance High liquidity Lubrication Fill brominated High hardness Medium density Flame retardancy
Uses	Floor Material Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Blue Natural color
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.02	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	18	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	87	ASTM D2240
Shore A, 5 seconds, injection molding	85	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	5.25	MPa	ASTM D412
Flow : 100% strain	5.90	MPa	ASTM D412
Transverse flow : 300% strain	6.68	MPa	ASTM D412
Flow : 300% strain	7.46	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	10.2	MPa	ASTM D412
Flow : Fracture	10.5	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	590	%	ASTM D412
Flow : Fracture	550	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	39.9	kN/m	ASTM D624
Flow	44.8	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	37	%	ASTM D395B
70°C, 22 hr	66	%	ASTM D395B

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	20	%	ASTM D2863

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	193 - 216	°C
Middle Temperature	193 - 216	°C
Front Temperature	193 - 216	°C
Nozzle Temperature	193 - 216	°C
Processing (Melt) Temp	193 - 216	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	y4pfls_MonpreneSP19985XRD1PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SCANTEC PC S75R GF10 V0	Polykemi AB	PC	SCANTEC
SWANCOR Epoxy 900	SWANCOR IND. CO., LTD.	Epoxy	SWANCOR Epoxy
Borealis PP BD712CF	Borealis AG	PP Copolymer	Borealis PP
DURACON® YF-5	Polyplastics Co., Ltd.	Acetal (POM) Copolymer	DURACON®
ULTEM™ 2200 resin	SABIC Innovative Plastics	PEI	ULTEM™