Order Products : sales@su-jiao.com
Generic Nylon 6 - Talc
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y4iBPo_Generic-Nylon-6---Talc.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 6 - Talc This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.24 - 1.48 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 - 3.2 | g/10 min | ISO 1133 |
| Molding Shrinkage (23°C) | 0.64 - 0.88 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 4500 - 8200 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 89.6 - 120 | MPa | ISO 527-2 |
| Tensile Strain (Yield, 23°C) | 1.5 - 12 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 4670 - 7300 | MPa | ISO 178 |
| Flexural Stress (23°C) | 92.5 - 190 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.0 - 5.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 35 - 50 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 200 - 201 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 200 - 201 | °C | ISO 306 |
| Melting Temperature (DSC) | 220 | °C | ISO 3146 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Ignition Temperature | 650 - 658 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 80.2 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 230 - 265 | °C | |
| Mold Temperature | 60.0 - 80.0 | °C | |
| Injection Pressure | 94.7 - 95.1 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 6 - TalcThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4000 | RTP Company | PPA | RTP |
| Tekuform C13 | TEKUMA Kunststoff GmbH | Acetal (POM) Copolymer | Tekuform |
| TABOREX TA 1135 HD | SILON s.ro | HDPE | TABOREX |
| Aquamix™ 110 | PolyOne Corporation | Latex | Aquamix™ |
| Osterlene® CI-14-00 | Osterman & Company | PS (GPPS) | Osterlene® |
