Order Products : sales@su-jiao.com
RTP 2801-40D
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y3RTGm_RTP-2801-40D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.- |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.998 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.50 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.010 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 896 | MPa | ASTM D638 |
| Tensile Strength | 12.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | % | ASTM D638 |
| Flexural Modulus | 689 | MPa | ASTM D790 |
| Flexural Strength | 15.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 530 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 690 | J/m | ASTM D4812 |
| Additional Information |
|---|
| Mold Shrinkage, Linear-Flow, ASTM D-955, 0.25in.: 7mil/in.Tensile Elongation, ASTM D-638: 10+% |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 177 - 232 | °C | |
| Middle Temperature | 177 - 232 | °C | |
| Front Temperature | 177 - 232 | °C | |
| Mold Temperature | 15.6 - 65.6 | °C | |
| Injection Pressure | 82.7 - 124 | MPa | |
| Back Pressure | 0.345 | MPa | |
| Clamp Tonnage | 4.1 - 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR WC 0587-21 BE1 RoHS | PolyOne Corporation | PP, Unspecified | Maxxam™ FR |
| PRE-ELEC® CP 1319 | Premix Oy | EVA | PRE-ELEC® |
| NuSil CF1-3800 | NuSil Technology | Silicone | NuSil |
| ADEKA CM series | Adeka Corporation | PUR-Ether | ADEKA |
| EMOPLEN® A 1208 T2 | EMAS Plastik San.Tic.AS. | PP, Unspecified | EMOPLEN® |
