Order Products : sales@su-jiao.com
Generic Epoxy - Aluminum
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y0du00_Generic-Epoxy---Aluminum.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Epoxy - Aluminum This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.65 to 2.03 | g/cm³ | ASTM D792 |
| Apparent Density | 1.48 to 1.69 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (23°C) | 0.043 to 0.20 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 85 to 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 3720 to 8320 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 27.6 to 56.2 | MPa | |
| Break, 23°C | 25.2 to 41.7 | MPa | |
| Flexural Strength (Yield, 23°C) | 24.4 to 92.4 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 73.2 to 200 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 54.4 to 157 | °C | ASTM D648 |
| Continuous Use Temperature | 72.5 to 177 | °C | ASTM D794 |
| CLTE - Flow | 2.9E-5 to 6.2E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (23°C) | 4.97 to 41.9 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life (23°C) | 4.0 to 1000 | min | |
| Shelf Life (23°C) | 51 to 52 | wk | |
| Thermoset Mix Viscosity | 1550 to 40900 | cP | ASTM D2393 |
| Demold Time | 1.0 to 1100 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mylar® A (92 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| INEOS PP H03G-06 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| Optix® CP-924 | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
| SQUARE® LIM1550-40A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
| VALOX™ K4530 resin | SABIC Innovative Plastics | PBT | VALOX™ |
