Telcar® TL-1431C Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Telcar TL-1431C is a general purpose thermoplastic elastomer, available in NAT and BLK, designed for various applications in the automotive, consumer and industrial segments. Telcar TL-1431C is a medium hardness, medium density, weatherable grade that is suitable for injection molding and extrusion.

General Information
Features	Light stabilization Good coloring Good adhesion Medium liquidity Good chemical resistance Good weather resistance Fill Medium density Medium hardness
Uses	Industrial application Weather-resistant sealing strip Application in Automobile Field Car interior parts Automotive exterior parts Car exterior decoration General Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.04	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	15	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	79	ASTM D2240
Shore A, 5 seconds, injection molding	77	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	7.58	MPa	ASTM D412
Tensile Elongation (Break)	430	%	ASTM D412

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	171 - 204	°C
Middle Temperature	177 - 210	°C
Front Temperature	182 - 216	°C
Nozzle Temperature	188 - 221	°C
Processing (Melt) Temp	188 - 221	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	160 - 188	°C
Cylinder Zone 2 Temp.	166 - 193	°C
Cylinder Zone 3 Temp.	171 - 199	°C
Cylinder Zone 4 Temp.	171 - 199	°C
Cylinder Zone 5 Temp.	177 - 204	°C
Die Temperature	184 - 210	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Telcar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	y01brV_TelcarTL1431C.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Unichem 8091	Colorite Polymers	PVC, Unspecified	Unichem
Axiall PVC HR-5009	Axiall Corporation	PVC, Rigid	Axiall PVC
Hifax CA 197 J WHITE	LyondellBasell Industries	TPO (POE)	Hifax
INEOS LLDPE LL6208AF	INEOS Olefins & Polymers Europe	LLDPE	INEOS LLDPE
LNP™ LUBRICOMP™ RX85514 compound	SABIC Innovative Plastics	Nylon 66	LNP™ LUBRICOMP™