Order Products : sales@su-jiao.com

Chemraz 510

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	Greene, Tweed & Co.
Trademark:	Chemraz
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	xypzlx_Chemraz-510.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Greene, Tweed's Chemraz 510, a perfluoroelastomer, offers an extremely borad range of chemical resistance with a Shore A hardness value of 90. With a temperature range of -22°F to 446°F (-30°C to 230°C), Chemraz 510 is well suited for use in a range of applications, from mechanical selas to pump housings. Because of versality, Chemraz 510 is often used as a standard compound for sealing at high pressures. It can be found in a variety of fluids and solutions including acids, caustics, aldehydes, esters, aromatics, hot water, steam, amines, methanol, ketones, TBA and MTBE. Chemraz 510 is available for use as O-rings, gaskets and many other custom shapes.

Message

Greene, Tweed's Chemraz 510, a perfluoroelastomer, offers an extremely borad range of chemical resistance with a Shore A hardness value of 90. With a temperature range of -22°F to 446°F (-30°C to 230°C), Chemraz 510 is well suited for use in a range of applications, from mechanical selas to pump housings.

Because of versality, Chemraz 510 is often used as a standard compound for sealing at high pressures. It can be found in a variety of fluids and solutions including acids, caustics, aldehydes, esters, aromatics, hot water, steam, amines, methanol, ketones, TBA and MTBE. Chemraz 510 is available for use as O-rings, gaskets and many other custom shapes.

General Information
Features	Good Chemical Resistance High Density High Hardness Low Temperature Resistant
Uses	Gaskets Housings Plumbing Parts Seals Valves/Valve Parts
Appearance	Black
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.92	g/cm³	ASTM D297

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	90		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (50% Strain)	7.58	MPa	ASTM D1414
Tensile Strength (Break)	13.6	MPa	ASTM D1414
Tensile Elongation (Break)	85	%	ASTM D1414
Compression Set ¹(204°C, 70 hr)	30	%	ASTM D395

Thermal	Nominal Value	Unit
Service Temperature	-30 to 230	°C

Note Message
1 .	25% Deflection

Resin Grade	Manufacturer	Category	Trademark
RTP 2800 B-65D	RTP Company	TPV	RTP
TECHNYL® A 218G1 V30 BLACK 34 N	Solvay Engineering Plastics	Nylon 66	TECHNYL® A
Telcar® TL-1522B	Teknor Apex Company	TPE	Telcar®
EVALENE® PP PHY0221	JG Summit Petrochemical Corporation	PP Homopolymer	EVALENE® PP
Leona™ FG172	Asahi Kasei Chemicals Corporation	Nylon 66	Leona™