Order Products : sales@su-jiao.com
MAJORIS HG264 - 1298
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xxpgqI_MAJORIS-HG264---1298.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HG264 - 1298 is a 20% glass fibre reinforced polypropylene compound intended for injection moulding. HG264 - 1298 has high rigidity and impact strength, very good long term heat resistancy, good dimensional stability and good creep resistancy also at high temperatures. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 24 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.90 - 1.1 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4840 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 61.5 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 4.2 | % | ISO 527-2/50 |
| Flexural Modulus | 3640 | MPa | ISO 178 |
| Flexural Stress | 103 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 15 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 47 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 150 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 128 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 260 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bayfill® 500 | Covestro - PUR | PUR, Unspecified | Bayfill® |
| AMC 8590 | Quantum Composites Inc. | Vinyl Ester | AMC |
| Iupilon® CGH2010KR | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| POLYFLAM® RPP 490 CS1 | A. Schulman Europe | PP Homopolymer | POLYFLAM® |
| Veradel® 3300 PREM MR | Solvay Specialty Polymers | PESU | Veradel® |
