Order Products : sales@su-jiao.com
DENILUB N 00U 2GR
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Vamp Tech |
| Trademark: | DENILUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xw1xeg_DENILUB-N-00U-2GR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PA 6 unfilled with graphite. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.3 | % | |
| Across Flow | 1.3 | % | |
| Water Absorption (Saturation) | 1.8 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4200 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 75.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 7.0 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.20 | ||
| Static | 0.24 | ||
| Wear Factor 1 | 60.0 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 4.5 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 50 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 80.0 | °C | ASTM D648A |
| Vicat Softening Temperature | 200 | °C | ASTM D1525 2 |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| 2 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TULAMID® PA-SV30-L1 | UCC Shchekinoazot | Nylon 6 | TULAMID® |
| BMC 1902 | Bulk Molding Compounds, Inc. | Alkyd | BMC |
| CGPC PVC SO-30X (105 phr Plasticizer E) | China General Plastics Corporation | PVC, Flexible | CGPC PVC |
| DOMAMID® 6G40 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| LUVOCOM® 20-0778/BK | Lehmann & Voss & Co. | PPA | LUVOCOM® |
