Order Products : sales@su-jiao.com
HONES® PPS HS-G40-I5
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Guangdong Shunde Hones Polymer Material Co., Ltd. |
| Trademark: | HONES® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xvNe6D_HONES-PPS-HS-G40-I5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ultra toughness |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| UL File Number |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.65 | g/cm³ | Internal Method |
| Molding Shrinkage | Internal Method | ||
| Flow : 2.00 mm | 0.38 | % | |
| Across Flow : 2.00 mm | 0.65 | % | |
| Water Absorption (23°C, 24 hr) | 0.010 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 105 | MPa | Internal Method |
| Tensile Elongation (Break) | 1.6 | % | Internal Method |
| Flexural Modulus | 7600 | MPa | Internal Method |
| Flexural Strength | 175 | MPa | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 | °C | Internal Method |
| CLTE | ISO 11359-2 | ||
| Flow | 2.0E-5 | cm/cm/°C | |
| Transverse | 4.0E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 8.0E+16 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
| Electric Strength (3.00 mm) | 15 | kV/mm | IEC 60243-1 |
| Dielectric Constant | IEC 60250 | ||
| 1 kHz | 4.60 | ||
| 1 MHz | 4.60 | ||
| Dissipation Factor | IEC 60250 | ||
| 1 kHz | 2.0E-3 | ||
| 1 MHz | 2.0E-3 | ||
| Comparative Tracking Index | 125 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (310°C) | 380 | Pa·s | ISO 11443 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SANREX S10G15 | Techno Polymer Co, Ltd. | SAN | SANREX |
| Mirakutoran® TPU E568 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| APEX® 241 | Teknor Apex Company | PVC, Flexible | APEX® |
| Fibremod™ GB311U | Borealis AG | PP, Unspecified | Fibremod™ |
| Adflex 7634 XCP | LyondellBasell Industries | Polyolefin, Unspecified | Adflex |
