Order Products : sales@su-jiao.com

Eltex® B2020LG/34

Category:	HDPE Copolymer , High Density Polyethylene Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	xv8EWG_Eltex-B2020LG-34.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Eltex® B2020LG/34 high density polyethylene is a white copolymer manufactured by INEOS Polyolefins. It contains 4.5 % titanium dioxide and is intended for the co-extrusion of bottles for the packaging of UHT sterilized milk. The resin is specifically designed for 3- or 6- layer bottles. It has the following essential properties:

A very low odour level guaranteeing the organoleptic properties of milk

Good rigidity

Good impact strength

Easy processing

It meets EU and FDA regulations governing the approval of materials used in the manufacture of packaging which may come into contact with food products.

General Information
Additive	Titanium Dioxide (TiO2) (5%)
Features	Copolymer Food Contact Acceptable Good Impact Resistance Good Organoleptic Properties Good Processability High Density High Heat Resistance Low to No Odor Med.-Wide Molecular Weight Distrib. Medium Rigidity
Uses	Bottles Food Packaging
Agency Ratings	EU Food Contact, Unspecified Rating FDA Food Contact, Unspecified Rating
RoHS Compliance	Contact Manufacturer
Appearance	White
Processing Method	Coextrusion

Physical	Nominal Value	Unit	Test Method
Density ¹	1.00	g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg	1.8	g/10 min
190°C/5.0 kg	6.0	g/10 min
Viscosity			Internal Method
190°C ²	1100000	mPa·s
in tetralene : 160°C ³	1.60E-4	g/ml

Note Message
1 .	Compression molded discs, cooled at 15°C per minute
2 .	Apparent dynamic viscosity of the material extruded at 190°C through a 1.0 mm diameter and 15 mm long die, at apparent shear rate 100/s
3 .	Inherent viscosity at 1 g / L

Resin Grade	Manufacturer	Category	Trademark
Makrolon® 2656	Covestro - Polycarbonates	PC	Makrolon®
Polyvel PLA HD-L02 PLA Impact Modifier (Transparent)	Polyvel Inc.	PLA	Polyvel PLA
EXTEM™ UH1006M resin	SABIC Innovative Plastics Europe	PI, TP	EXTEM™
Elastollan® 1185AW	BASF Corp. Thermoplastic Polyurethanes	TPU-Polyether	Elastollan®
HydroMed™ D7	AdvanSource Biomaterials Corp.	PUR-Ether	HydroMed™