Order Products : sales@su-jiao.com
RTP 2299 X 115090 B
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xnpPg9_RTP-2299-X-115090-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Carbon Nanotube - Electrically Conductive |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.2 - 1.8 | % | ASTM D955 |
| Moisture Content | 0.10 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Static Decay | sec | FTMS 101C 4046.1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5170 | MPa | ASTM D638 |
| Tensile Strength | 91.7 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 2.2 | % | ASTM D638 |
| Flexural Modulus | 4830 | MPa | ASTM D790 |
| Flexural Strength | 172 | MPa | ASTM D790 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | |||
| -- | 1.0E+2 - 1.0E+4 | ohms | ASTM D257 |
| -- | 10 - 1.0E+3 | ohms | ESD STM11.11 |
| Volume Resistivity | 1.0 - 1.0E+2 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Dew Point | -28.9 | °C | |
| Processing (Melt) Temp | 349 - 399 | °C | |
| Mold Temperature | 163 - 218 | °C | |
| Injection Pressure | 82.7 - 124 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAXATEC™ 4210 | SAX Polymers | ASA | SAXATEC™ |
| TRIBOCOMP® PA6 CF10 TS0 | EPIC Polymers | Nylon 6 | TRIBOCOMP® |
| Grilamid® L 25 W 40 ESD | EMS-GRIVORY | Nylon 12 | Grilamid® |
| ENFLEX S3090A | ENPLAST Americas, a Ravago Group Company | TPE | ENFLEX |
| MAXAMID™ PA6G15HSL-BK | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
