Category: | TPV , Thermoplastic Vulcanizate |
Manufacturer: | Crosspolimeri S.p.A. |
Trademark: | EPIGUM |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | xmttiW_EPIGUM-DPE-64-F.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
EPIGUM DPE/64 F is a thermoplastic elastomer. EPIGUM DPE/64 F is our TPV vulcanized rubber workable as thermoplastic compound. Suitable also for food contact. |
General Information | |
---|---|
Features |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
Moisture | 0.030 | % |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness (Shore A) | 66 | ASTM D2240 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength | 6.30 | MPa | ASTM D638 |
Tensile Elongation (Break) | 410 | % | ASTM D638 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Set (100% Strain) | 11 | % | ASTM D412 |
Tensile Stress 1(100% Strain) | 2.30 | MPa | ASTM D412 |
Tear Strength 2(23°C) | 28.0 | kN/m | ASTM D624 |
Compression Set (100°C, 22 hr) | 31 | % | ASTM D395B |
Aging | Nominal Value | Unit | Test Method |
---|---|---|---|
Change in Mass (121°C, 24 hr) | 79 | % | ASTM D471 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Brittleness Temperature | < -60.0 | °C | ASTM D746 |
Extrusion | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 80.0 to 90.0 | °C | |
Drying Time | 2.0 to 3.0 | hr | |
Cylinder Zone 1 Temp. | 180 | °C | |
Cylinder Zone 2 Temp. | 185 | °C | |
Cylinder Zone 3 Temp. | 190 | °C | |
Cylinder Zone 4 Temp. | 200 | °C | |
Cylinder Zone 5 Temp. | 215 | °C | |
Die Temperature | 220 | °C |
Note Message | |
---|---|
1 . | Die C |
2 . | Die C |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Monprene® CP-33142 XRD1 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
TEREZ PA 6.6 HT 7500 GF 60 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
ALTECH® PP-H A 1000/546 FR | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
Hanwha Total PE EP30 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | LLDPE | Hanwha Total PE |
Innoprene 1800N/B | Kumho Polychem Co., Ltd. | TPV | Innoprene |