Order Products : sales@su-jiao.com
D-MEC SCR710
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | D-MEC Ltd. |
| Trademark: | D-MEC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xm9oUX_D-MEC-SCR710.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: High toughness Laser: Ar/solid-state Post-cure: Not needed |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density 1 | 1.19 | g/cm³ | |
| Viscosity 2(25°C) | 500 | mPa·s |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Critical Exposure | 13.0 | mJ/cm² | |
| Penetration Depth | 135.0 | µm |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 81 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus | 2700 | MPa | |
| Tensile Strength | 66.0 | MPa | |
| Tensile Elongation (Break) | 10 | % | |
| Flexural Modulus | 2500 | MPa | |
| Flexural Strength | 85.0 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Unnotched Izod Impact | 32 to 38 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 49.0 | °C | |
| Glass Transition Temperature | 78.0 | °C | DMA |
| Note Message | |
|---|---|
| 1 . | Liquid Resin |
| 2 . | Liquid Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Salflex 375A | Salflex Polymers Ltd. | TPV | Salflex |
| Sanren F200A (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| Stanyl® TQ261F5 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Panlite® ML-7500ZCH | TEIJIN LIMITED | PC | Panlite® |
| Plaskon S-7 | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
