Order Products : sales@su-jiao.com
Tecotek® BC43 UF65 NL CE
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Eurotec Engineering Plastics |
| Trademark: | Tecotek® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xlRcku_Tecotek-BC43-UF65-NL-CE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PC/ABS, unfilled, heat & UV stabilized, natural, standard grade |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2250 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 45.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | > 50 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180/1A | ||
| -30°C | 20 | kJ/m² | |
| 23°C | 35 | kJ/m² | |
| Unnotched Izod Impact Strength | ISO 180/1U | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 105 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 120 | °C | ISO 306/B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+13 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | HB | ||
| 1.60 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 100 | °C | |
| Drying Time | 2.0 to 6.0 | hr | |
| Hopper Temperature | 60.0 to 80.0 | °C | |
| Processing (Melt) Temp | 240 to 260 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 50.0 to 100 | MPa | |
| Back Pressure | Low |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| McCann PP M20TCPP20 | McCann Plastics Inc. | PP Copolymer | McCann PP |
| AKROMID® B3 GF 50 9 RM-M black (3147) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| BITONER® BT-2104 | Qingdao Bater Chemical Co., Ltd. | TP, Unspecified | BITONER® |
| DAI-EL™ G-716 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| TechnoFin PP GF 30 | TechnoCompound GmbH | PP, Unspecified | TechnoFin |
