Order Products : sales@su-jiao.com
RTP 1385 UP
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xlGiGb_RTP-1385-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.45 | g/cm³ | ISO 1183 |
| Moisture Content | 0.040 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 28500 | MPa | ISO 527-2 |
| Tensile Stress | 255 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 1.3 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 23000 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 385 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Injection Molded) | 8.0 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(Injection Molded) | 60 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 150 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -25.0 | °C | |
| Processing (Melt) Temp | 305 - 330 | °C | |
| Mold Temperature | 135 - 175 | °C | |
| Injection Pressure | 70.0 - 105 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| 2 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 6 B22^E F30 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| Moplen EP301E | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| APEX® 85-J438-H | Teknor Apex Company | PVC, Flexible | APEX® |
| HiFill® PA12 CM40 | Techmer Engineered Solutions | Nylon 12 | HiFill® |
| Plenco 03557 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
