Order Products : sales@su-jiao.com
SMOKEGUARD™ FP 108 NATURAL
| Category: | Fluoropolymer , Fluoropolymer |
| Manufacturer: | AlphaGary |
| Trademark: | SMOKEGUARD™ FP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xkXKis_SMOKEGUARD-FP-108-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SMOKEGUARD FP 108 IS A HIGH PEFORMANCE FLUOROPOLYMER COMPOUND WITH EXCELLENT SMOKE AND FLAME PROPERTIES INTENDED FOR DEMANDING CABLE CONSTRUCTIONS. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.77 - 2.83 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 66 - 72 | ASTM D2240 | |
| Shaw D, 15 seconds | 58 - 64 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 15.5 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 300 | % | ASTM D412 |
| Tear Strength (1.91 mm) | 95.1 | kN/m | ASTM D624 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1 | UL Unspecified | ||
| 136°C, 168 hr | 3.0 | % | UL Unspecified |
| 158°C, 168 hr | 2.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2 | UL Unspecified | ||
| 136°C, 168 hr | 34 | % | UL Unspecified |
| 158°C, 168 hr | 15 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -46.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 2.92 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.012 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 100 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 277 - 310 | °C | |
| Cylinder Zone 3 Temp. | 277 - 310 | °C | |
| Cylinder Zone 5 Temp. | 277 - 310 | °C | |
| Melt Temperature | 310 - 321 | °C | |
| Extruder Screw L/D Ratio | 24.0:1.0 | ||
| Extruder Screw Compression Ratio | 2.5:1.0 | ||
| Drop down | 6.0:1.0 to 20.0:1.0 |
| Extrusion instructions |
|---|
| Draw Down Balance = 1.0 (Neutral)Metallurgy: 17-4 PH Stainless Steel (based on cursory low output study)Screen Packs: 20-40-20 |
| Note Message | |
|---|---|
| 1 . | Thickness: 30 mil |
| 2 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| apigo® E/350 | API SpA | TPO (POE) | apigo® |
| Five Plus™ CPP20T | Noble Polymers | PP Copolymer | Five Plus™ |
| GAPEX® FPP30GQ15HB NATURAL | Ferro Corporation | PP, Unspecified | GAPEX® |
| LUVOCOM® 1105/RD7405 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| LNP™ COLORCOMP™ 221RC compound | SABIC Innovative Plastics | PC | LNP™ COLORCOMP™ |
