Order Products : sales@su-jiao.com
Stanyl® TC502
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Stanyl® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xizTnm_Stanyl-TC502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Stanyl® TC502 is a Polyamide 46 (Nylon 46) material. It is available in Asia Pacific or Europe. Primary attribute of Stanyl® TC502: Conductive. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.42 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.2 | % | |
| Flow | 0.60 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 2.0 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9000 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 65.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 1.1 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature 1 | 295 | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | ||
| Flow | 2.5E-5 | cm/cm/°C | |
| Transverse | 3.5E-5 | cm/cm/°C | |
| Thermal Conductivity | ASTM E1461 | ||
| -- 2 | 2.1 | W/m/K | |
| -- 3 | 14 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+6 | ohms·cm | IEC 60093 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Rear Temperature | 280 to 320 | °C | |
| Middle Temperature | 300 to 320 | °C | |
| Front Temperature | 300 to 320 | °C | |
| Nozzle Temperature | 305 to 335 | °C | |
| Processing (Melt) Temp | 305 to 325 | °C | |
| Mold Temperature | 80.0 to 120 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 2.00 to 10.0 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| 2 . | through plane |
| 3 . | in plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Milastomer™ G750BS | Mitsui Chemicals America, Inc. | TPV | Milastomer™ |
| SCHULAMID® 66 GF 30 GID | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| SUPREME HIPS SH 820 | Supreme Petrochem Ltd. | PS (HIPS) | SUPREME HIPS |
| Gallonprene® GP200-40Q | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| LNP™ LUBRICOMP™ RFI12 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
