Order Products : sales@su-jiao.com
PRIMATOP HDPE 003955BAS
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Amco Polymers |
| Trademark: | PRIMATOP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xiFRpf_PRIMATOP-HDPE-003955BAS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Hexene Copolymer |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| F50 | 35.0 | hr | ASTM D1693B |
| 100% Igepal, F50 | 45.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 600 | % | ASTM D638 |
| Flexural Modulus | 1380 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide PK005EI2 | Eurostar Engineering Plastics | Nylon 6 | Staramide |
| Deco-Coat™ UV Cure 7156™ | Epoxies, Etc. | Epoxy | Deco-Coat™ |
| Delta N66R-4G30 | Delta Polymers | Nylon 66 | Delta |
| ELASTOSIL® AUX PRIMER G 3242 | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
| Larton K/20 | LATI S.p.A. | PPS | Larton |
