Order Products : sales@su-jiao.com
Desmopan® DP 9370A
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xgE11P_Desmopan-DP-9370A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; free from plasticizers; high moisture vapor transmission rate; Application; breathable films; Seals, membranes; Films; hard to soft systems; Sports shoe soles |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1060 | kg/m³ | ISO 1183 1 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 3 sec) | 70 | ISO 868 2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3 | DIN 53504 | ||
| Break, 23°C | 25.7 | MPa | |
| 10% Strain | 1.00 | MPa | |
| 100% Strain, 23°C | 3.50 | MPa | |
| 300% Strain, 23°C | 6.70 | MPa | |
| Tensile Strain 4(Break, 23°C) | 740 | % | DIN 53504 |
| Abrasion Resistance (23°C) | 69.0 | mm³ | ISO 4649-A |
| Tensile Storage Modulus | ISO 6721-1,-4 | ||
| -20°C | 125 | MPa | |
| 20°C | 11.0 | MPa | |
| 60°C | 9.00 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience (23°C) | 63 | % | ISO 4662 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 5(23°C) | 39 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 22 | % | |
| 70°C, 24 hr | 49 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 210 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 175 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | 200 mm/min |
| 4 . | 200 mm/min |
| 5 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYFORT® FTP 3507 | A. Schulman Inc. | TPO | POLYFORT® |
| Tufpet PBT G2030 | Mitsubishi Rayon America Inc. | PBT | Tufpet |
| NEOPLAST 173 M/E | Zylog Plastalloys | TPE | NEOPLAST |
| CAPROWAX P™ 6006-00-000 Granulat | POLYFEA | Biodeg Polymers | CAPROWAX P™ |
| Hostacom DYS 707N E C12827 | LyondellBasell Industries | PP Copolymer | Hostacom |
