Order Products : sales@su-jiao.com
RTP 2899 X 106530 B
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xg9qrg_RTP-2899-X-106530-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nylon 6 Overmolding |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.3 - 2.0 | % | ASTM D955 |
| Moisture Content | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel strength- Nylon 6 1 | 4.4 | kN/m |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain, 3.18mm 2 | 1.31 | MPa | ASTM D412 |
| 100% strain, 3.18mm 3 | 1.72 | MPa | ASTM D412 |
| 300% strain, 3.18mm 4 | 3.17 | MPa | ASTM D412 |
| Tensile Strength 5(Yield, 3.20 mm) | 3.45 | MPa | ASTM D412 |
| Tensile Elongation 6(Break) | 330 | % | ASTM D412 |
| Tear Strength 7 | 16.6 | kN/m | ASTM D624 |
| Compression Set 8 | ASTM D395B | ||
| 23°C, 22 hr | 17 | % | ASTM D395B |
| 70°C, 22 hr | 38 | % | ASTM D395B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, ** Values per RTP Company testing.) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Dew Point | -17.8 | °C | |
| Processing (Melt) Temp | 249 - 282 | °C | |
| Mold Temperature | 37.8 - 71.1 | °C | |
| Injection Pressure | 34.5 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | 90°, 20 in/min, RTP 55, Interface Failure |
| 2 . | C mold, 510mm/min |
| 3 . | Mouth die C, 510mm/min |
| 4 . | C mold, 510mm/min |
| 5 . | C mold, 500 mm/min |
| 6 . | Mouth die C, 500 mm/min |
| 7 . | C mould |
| 8 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Primefin V525HUV | Lucent Polymers, Inc. | PP, Unspecified | Primefin |
| THERMOLAST® K TF4FMS (Series: FC/AD1) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Zythane® 4070A | Alliance Polymers & Services | TPU-Polyester | Zythane® |
| Edistir® N 2560 | Versalis S.p.A. | PS (GPPS) | Edistir® |
| Rotec® AES A 711 | ROMIRA GmbH | AES | Rotec® AES |
