Petrothene® L2560S Datasheet,LDPE,LyondellBasell Industries-SHANGHAI SUSHENG

Message
PETROTHENE L 2560S is a fractional melt index LDPE resin that exhibits a good balance of strength, clarity and heat seal characteristics. L 2560S is formulated without slip but with a medium antiblock level. Typical applications include produce bags, shrink wrap, frozen food containers, bundling and diaper films.

General Information
Additive	Moderate caking resistance
Features	Good strength Good heat sealability Low liquidity Definition, high Compliance of Food Exposure Moderate caking resistance
Uses	Films Bags Container Food container Shrinkable film
Agency Ratings	FDA 21 CFR 177.1520
Forms	Particle
Processing Method	Film extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.925	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.60	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
secant modulus			ASTM D882
1% secant, MD : 32 µm, blown film	248	MPa	ASTM D882
1% secant, MD : 51 µm, blown film	228	MPa	ASTM D882
1% secant, TD : 32 µm, blown film	290	MPa	ASTM D882
1% secant, TD : 51 µm, blown film	269	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield, 32 µm, blown film	11.0	MPa	ASTM D882
MD : Yield, 51 µm, blown film	11.0	MPa	ASTM D882
TD : Yield, 32 µm, blown film	11.7	MPa	ASTM D882
TD : Yield, 51 µm, blown film	11.7	MPa	ASTM D882
MD : Broken, 32 µm, blown film	24.1	MPa	ASTM D882
MD : Broken, 51 µm, blown film	20.0	MPa	ASTM D882
TD : Broken, 32 µm, blown film	17.2	MPa	ASTM D882
TD : Broken, 51 µm, blown film	17.2	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Broken, 32 µm, blown film	120	%	ASTM D882
MD : Broken, 51 µm, blown film	230	%	ASTM D882
TD : Broken, 32 µm, blown film	500	%	ASTM D882
TD : Broken, 51 µm, blown film	540	%	ASTM D882
Dart Drop Impact			ASTM D1709
32 µm, blown film	80	g	ASTM D1709
51 µm, blown film	120	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD : 32 µm, blown film	150	g	ASTM D1922
MD : 51 µm, blown film	450	g	ASTM D1922
TD : 32 µm, blown film	150	g	ASTM D1922
TD : 51 µm, blown film	300	g	ASTM D1922

Optical	Nominal Value	Unit	Test Method
Gloss			ASTM D2457
45 °, 31.8 µm, blown film	60		ASTM D2457
45, 50.8 µm, blown film	67		ASTM D2457
Haze			ASTM D1003
31.8 µm, blown film	8.5	%	ASTM D1003
50.8 µm, blown film	8.5	%	ASTM D1003

Additional Information
Data obtained from films produced in a 2" commercially available extruder with a 4" die, 309°F Melt Temperature, 2:1 BUR, 0.025" die gap at 50 lb/hr.

Category:	LDPE , Low Density Polyethylene
Manufacturer:	LyondellBasell Industries
Trademark:	Petrothene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	xg9Qip_Petrothene-L2560S.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Qenos PE MD0898	Qenos Pty Ltd	MDPE	Qenos PE
Zelfo HG	Zelfo Technology GmbH	CA	Zelfo
Allen ABS 552	SEKISUI Polymer Innovations, LLC	ABS	Allen ABS
OTECH TPO OTO7510EP1 - Automotive	OTECH Corporation	TPO	OTECH TPO
Sylvin 8250-90UV Grey 9530	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin