Order Products : sales@su-jiao.com
Formolene® L62030B
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xfw98O_Formolene-L62030B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® L62030B is a linear low density grade made using gas-phase technology. The resin is designed for use in the skin layer of a multi-layer stretch film application. Formolene® L62030B meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.2 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Fracture | 44.8 | MPa | ASTM D882 |
| TD : Fracture | 33.1 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 550 | % | ASTM D882 |
| TD : Fracture | 850 | % | ASTM D882 |
| Dart Drop Impact | 90 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 280 | g | ASTM D1922 |
| TD | 580 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 98 | ASTM D523 | |
| Haze | 1.4 | % | ASTM D1003 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Cast Film Extrusion | |||
| Note: Film Properties measured on 20 micron cast film extruded at 1,000 ft/min. with a melt temperature at 510°F. Actual film properties may vary depending on operating conditions and additive packages. Film properties are not intended to be used asspe |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 800 TFE 20 EG | RTP Company | Acetal (POM) Copolymer | RTP |
| Sunny® PA66 EN230 | Guangdong Shunde Shunyan New Material Co., Ltd. | Nylon 66 | Sunny® |
| Nylene® 5160 HS | Custom Resins Group | Nylon 66 | Nylene® |
| Hylon® N1240MGHL25UV | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| LinGen FR295 | Shanghai Lin Gen Rubber Materials Co., Ltd. | TPE | LinGen |
