Category: | TPV , Thermoplastic Vulcanizate |
Manufacturer: | Mitsui Chemicals America, Inc. |
Trademark: | Milastomer™ |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | xew4Nm_Milastomer-W651B.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Milastomer™W651B is a thermoplastic vulcanized rubber (TPV) material,. This product is available in North America and is processed by blow molding or extrusion. Milastomer™Typical application areas of W651B are: engineering/industrial accessories |
General Information | |
---|---|
Uses |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.880 | g/cm³ | ASTM D1505 |
Melt Mass-Flow Rate (MFR) (230°C/10.0 kg) | 60 | g/10 min | ISO 1133 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness | ISO 48 | ||
Shaw A | 67 | ISO 48 | |
Shaw A, 5 seconds | 63 | ISO 48 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress 1(Break) | 5.50 | MPa | ISO 37 |
Tensile Elongation 2(Break) | 500 | % | ISO 37 |
Compression Set | ISO 815 | ||
23°C, 22 hr | 27 | % | ISO 815 |
70°C, 22 hr | 38 | % | ISO 815 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Brittleness Temperature | < -60.0 | °C | Internal method |
Additional Information |
---|
All tests performed according to Mitsui methods. |
Note Message | |
---|---|
1 . | 500 mm/min |
2 . | 500 mm/min |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RJM SF402-S | RJM International, Inc. | PPE | RJM |
Yanshan PE LD113 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
AQUAFORCE® PA66 G50-01 SCHWARZ | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 66 | AQUAFORCE® |
HANWHA 3392 | Hanwha Chemical | HDPE | HANWHA |
POCAN® KL 1-7033 000000 | LANXESS GmbH | PBT | POCAN® |