Order Products : sales@su-jiao.com
Daelim Po1y® DHC-1
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | DAELIM INDUSTRIAL CO., LTD. |
| Trademark: | Daelim Po1y® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xcPEzW_Daelim-Po1y-DHC-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Daelim Po1y® DHC-1 is a High Density Polyethylene product. It is available in Asia Pacific. Typical application: Plumbing/Piping/Potable Water. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.58 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F20) | > 2000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 22.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 600 | % | ASTM D1708 |
| Flexural Modulus | 785 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.00 mm) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time 3(200°C) | > 60 | min | ASTM D3895 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Pigment Dispersion | 1 or 2 | ASTM D5596 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 190 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | Al Pan |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® eXten D 458P NATURAL | Solvay Engineering Plastics | Nylon 610 | TECHNYL® eXten |
| Texin® 4210 | Covestro - PUR | PC+TPU | Texin® |
| Fluoraz FEPM 799 | Greene, Tweed & Co. | FEP | Fluoraz |
| PEEK-OPTIMA® Unfilled | Invibio Inc. | PEEK | PEEK-OPTIMA® |
| Moplen EP440M | PolyMirae | PP Impact Copolymer | Moplen |
