Order Products : sales@su-jiao.com
ASI POLYETHYLENE CP 851
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xblduP_ASI-POLYETHYLENE-CP-851.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP 851 is a high flow injection-molding grade of conventional (high pressure) low density polyethylene. This material meets the specifications in FDA Regulation 21 CFR 177.1520, (c)3.1. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.923 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | 50 | ASTM D1706 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 10.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 200 | % | ASTM D638 |
| Apparent Bending Modulus | 138 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom SP7210 | Spartech Polycom | PC | Spartech |
| DURANEX® 303RA | Polyplastics Co., Ltd. | PBT | DURANEX® |
| Pebax® Rnew 70R53 SP 01 | Arkema | PEBA-Ether | Pebax® Rnew |
| SIBUR Synthetic Rubber SBR-1706 Grade B | SIBUR | SBR, Emulsion | SIBUR Synthetic Rubber |
| VALOX™ DR51 resin | SABIC Innovative Plastics | PBT | VALOX™ |
