Order Products : sales@su-jiao.com
SureSpec LD20-020
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xXbimH_SureSpec-LD20-020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LD20-020 is a certified prime resin specially designed to meet the requirements of most 1 to 3 mils thickness Blown film liner applications. LD20-020 features easy processability. Large lot size and superior lot-to-lot uniformity ensure consistent film production. Minimum recommended film thickness is 1.0 mil. LD20-020 contains no slip and no antiblock. LD20-020 complies with FDA regulation 21CFR 177.1520 (c) 2.1 + 2.2 and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 38 | µm | |
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD : 38 µm | 175 | MPa | |
| 1% Secant, TD : 38 µm | 205 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 38 µm | 10.0 | MPa | |
| TD : Yield, 38 µm | 10.0 | MPa | |
| MD : Break, 38 µm | 25.0 | MPa | |
| TD : Break, 38 µm | 19.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 38 µm | 350 | % | |
| TD : Break, 38 µm | 600 | % | |
| Dart Drop Impact (38 µm) | 85 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm | 580 | g | |
| TD : 38 µm | 120 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.0 µm, Blown Film) | 10 | ASTM D2457 | |
| Haze (25.0 µm, Blown Film) | 1.5 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIREX® 3027U(M3) | Samyang Corporation | PC | TRIREX® |
| Yanshan PE LD150 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| ADEKA EH-5030S | Adeka Corporation | Epoxy | ADEKA |
| LNP™ STAT-KON™ DEP32 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
| Zytel® SC310 NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
