Order Products : sales@su-jiao.com
Lupolen 1800 H
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Lupolen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xW8MdP_Lupolen-1800-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lupolen 1800 H is a low density polyethylene (LDPE) resin used in a wide range of processing methods such as injection molding, blow molding and film extrusion. It exhibits very good softness and toughness and good dimensional stability. Lupolen 1800 H is delivered in pellet form and is not additivated. Typical customer applications include caps & closures, lids and champagne corks. Lupolen 1800 H is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.5 | g/10 min | ISO 1133 |
| Spiral Flow | 36.0 | cm | Internal Method |
| Environmental Stress-Cracking Resistance 1 | 5.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 45 | ISO 868 | |
| Ball Indentation Hardness (H 49/30) | 15.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 200 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 9.00 | MPa | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ISO 306/A50 |
| Melting Temperature (DSC) | 108 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in 10% nonionic surfactants |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mold Max® Stroke | Smooth-On, Inc | Silicone | Mold Max® |
| TAISOX 9002 | Formosa Plastics Corporation | HDPE | TAISOX |
| NITRIFLEX NP-6121 | NITRIFLEX | NBR | NITRIFLEX |
| ALTECH® PA6 B 1000/209 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Geon™ Vinyl Flexible R1700D | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
