Order Products : sales@su-jiao.com
Thermoset Plastics SC-148
| Category: | Silicone , Silicone |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xW52LX_Thermoset-Plastics-SC-148.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics SC-148 is a Silicone material. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics SC-148 are:
Typical application of Thermoset Plastics SC-148: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.998 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 22 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 4.76 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 430 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 9.0E-4 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.7E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant | ASTM D150 | ||
| 100 Hz | 2.98 | ||
| 100 kHz | 2.98 | ||
| Dissipation Factor | ASTM D150 | ||
| 100 Hz | 1.5E-3 | ||
| 100 kHz | 2.0E-4 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 10 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 50000 | cP | ASTM D2393 |
| Demold Time (25°C) | 1400 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tufprene™ 125 | AKelastomers | SBS | Tufprene™ |
| Andur 1-75 DP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| ARMAMID® PA MN 20-1AP | Poly Plastic | Nylon 6 | ARMAMID® |
| Hostaform® MT12U03 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| KRATON® G1654 H | Kraton Polymers LLC | SEBS | KRATON® |
