Vyncolit® SI 9002N Datasheet,Silicone,Vyncolit N.V.-SHANGHAI SUSHENG

Message
SI 9002N is a short fiberglass reinforced silicone molding compound, which offers moderate strength properties, and dimensional stability and excellent long-term thermal stability at elevated temperatures.

General Information
Filler / Reinforcement	Glass fiber reinforced material
Features	Good dimensional stability Good strength Thermal stability, good
Appearance	Red Grey
Forms	Particles
Processing Method	Resin transfer molding Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.90	g/cm³	ASTM D792
Molding Shrinkage - Flow (Compression Molded)	0.50 - 0.80	%	ASTM D955
Water Absorption (23°C, 24 hr)	0.16	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	90		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break, Compression Molded)	27.0	MPa	ASTM D638
Flexural Modulus (Compression Molded)	14000	MPa	ASTM D790
Flexural Strength (Break)	52.0	MPa	ASTM D790
Compressive Strength	88.0	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (Compression Molded)	22	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded)	282	°C	ASTM D648
CLTE - Flow	3.3E-5	cm/cm/°C	ASTM E831
Thermal Conductivity	0.81	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength			ASTM D149
-- ¹	9.5	kV/mm	ASTM D149
-- ²	8.8	kV/mm	ASTM D149
Arc Resistance	210	sec	ASTM D495

Additional Information
All ASTM properties listed were tested in accordance with ASTM D5948.The value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM C518.Powder Density, ASTM D1895: 0.9 g/cm³Water Absorption, ASTM D570, 48 hrs, 50°C: 0.39%DTUL @264psi - Unannealed, ASTM D648, Post Baked, Compression Molded: >282°CDielectric Strength, ASTM D149, 60 Hz, Method B, wet: 8.8 kV/mmDielectric Strength, ASTM D149, 60 Hz, Method A, wet: 9.5 kV/mm

Additional Information

All ASTM properties listed were tested in accordance with ASTM D5948.The value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM C518.Powder Density, ASTM D1895: 0.9 g/cm³Water Absorption, ASTM D570, 48 hrs, 50°C: 0.39%DTUL @264psi - Unannealed, ASTM D648, Post Baked, Compression Molded: >282°CDielectric Strength, ASTM D149, 60 Hz, Method B, wet: 8.8 kV/mmDielectric Strength, ASTM D149, 60 Hz, Method A, wet: 9.5 kV/mm

Note Message
1 .	Method A (short time)
2 .	Method B (step by step)

Category:	Silicone , Silicone
Manufacturer:	Vyncolit N.V.
Trademark:	Vyncolit®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	xVRaDQ_Vyncolit-SI-9002N.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 200 GB 20	RTP Company	Nylon 66	RTP
megol® P06 A60X3	API SpA	SEBS	megol®
BorSafe™ ME3440	Borealis AG	MDPE	BorSafe™
Ebalta MG 804, 804 GF / MG 804-1	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
Geon™ Vinyl Flexible A65M0	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible