Order Products : sales@su-jiao.com
Lutene® XL8080UC
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | Lutene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xRFiO0_Lutene-XL8080UC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description LUTENE XL8080UC is a superior cleanliness version for high voltage power cable insulation and is designated as UC(Ultra-Clean) due to its extremely low level of contamination. LUTENE XL8080UC use a special base resin with lower melt index than well-known XL8080UC to prevent a sag in heavy walled cables. Applications Extra high voltage power cable insulation |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Degree of Crosslinking | > 80 | % | ASTM D2765A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Set 1 | IEC 60811-2-1 | ||
| Elongation Under Load : 200°C | < 180 | % | |
| Permanent Deformation : 200°C | < 15 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Break) | > 19.7 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | > 500 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (135°C, 168 hr) | < 10 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (135°C, 168 hr) | < 10 | % | ASTM D573 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 22 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 2.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 3.0E-3 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | 0.2 MPa |
| 2 . | 250 mm/min |
| 3 . | 250 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VICTREX® PEEK 450GL20 | Victrex plc | PEEK | VICTREX® PEEK |
| Zeoforte® ZSC 2295CX | Zeon Chemicals L.P. | NBR | Zeoforte® |
| 4MID® 9AB23500 | 4Plas | Nylon 66/6 | 4MID® |
| ADDINYL A2 ZV30 | ADDIPLAST | Nylon 66 | ADDINYL |
| Moplen HP500L | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
