Order Products : sales@su-jiao.com
RAMTOUGH RZ225
| Category: | PC , Polycarbonate |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | RAMTOUGH |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xMhukI_RAMTOUGH-RZ225.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCARBONATE FOR INJECTION MOULDING APPLICATIONS. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 15 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage | |||
| Flow | 0.50 - 0.70 | % | ASTM D955 |
| -- | 0.50 - 0.70 | % | ISO 2577 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | > 60.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | > 70 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | > 2100 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | > 85.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | > 550 | J/m | ASTM D256 |
| 23°C | > 50 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | > 130 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, not annealed | > 120 | °C | ASTM D648, ISO 75-2/A |
| Vicat Softening Temperature | 145 | °C | ASTM D1525, ISO 306 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-2 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 4.0 - 5.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 270 - 290 | °C | |
| Middle Temperature | 280 - 300 | °C | |
| Front Temperature | 290 - 310 | °C | |
| Processing (Melt) Temp | 270 - 310 | °C | |
| Mold Temperature | 80.0 - 120 | °C | |
| Injection Pressure | 70.0 - 107 | MPa | |
| Holding Pressure | 35.0 - 85.0 | MPa | |
| Back Pressure | 0.350 - 0.700 | MPa | |
| Screw Speed | 60 - 90 | rpm |
| Injection instructions |
|---|
| Fill Speed: 25 to 50 mm/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® PA523G15 | Guangdong Silver Age Sci & Tech. Co., Ltd | Nylon 6 | SILVER® |
| Ultramid® A3WGM53 BK20560 | BASF Corporation | Nylon 66 | Ultramid® |
| Geon™ HC 2165 | PolyOne Corporation | PVC, Flexible | Geon™ HC |
| INNOPOL® PP CS 1-2140 LH | Inno-Comp Ltd. | PP Homopolymer | INNOPOL® PP |
| LNP™ THERMOCOMP™ RF007ES compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
