Order Products : sales@su-jiao.com

ESENTTIA 01C25

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	xG9XYl_ESENTTIA-01C25.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Characteristics: Low melt flow rate Impact Block Copolymer polypropylene; very high impact/stiffness balance. Recommended for: Compounding for the automotive industry; sheet extrusion, Cartonplast; high volume extrusion blow molding containers; extrusion thermoforming of containers that require conservation at temperatures below 0°C; extrusion and injection molding general purpose applications.

General Information
Features	Block Copolymer Food Contact Acceptable General Purpose Low Flow
Uses	Automotive Applications Compounding Containers General Purpose Sheet
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Compounding Extrusion Extrusion Blow Molding Injection Molding Sheet Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	0.70	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	24.1	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	10	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1120	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	750	J/m	ASTM D256A
Gardner Impact ⁵(-30°C, 3.20 mm, Injection Molded)	35.0	J	ASTM D5420

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min
5 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Veroplas 660	PlastxWorld Inc.	ABS	Veroplas
NEXT REPROCESSED PA6 8233-300R	NEXT Specialty Resins, Inc.	Nylon 6	NEXT REPROCESSED
NEMCON H PO DP117/X2	Ovation Polymers Inc.	PEEK	NEMCON H
Bapolene® 5005H	Bamberger Polymers, Inc.	HDPE, HMW	Bapolene®
ALTECH® PP-B C 4920/570 MR 20	ALBIS PLASTIC GmbH	PP Copolymer	ALTECH® PP-B