Order Products : sales@su-jiao.com
Qenos PE GM4755F
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Qenos PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xEyObL_Qenos-PE-GM4755F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GM4755F is a high molecular weight High Density Polyethylene. GM4755F is intended for the production of blown film of greater than 10µm in thickness. Typical applications include carry bags and liners. Suitability for use in any application should be determined by appropriate performance testing. GM4755F is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.949 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.10 | g/10 min | |
| 190°C/5.0 kg | 0.30 | g/10 min |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 1100 | MPa | ASTM D790 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 15 | µm | |
| Tensile Strength - MD (Yield, 15 µm) | 29.0 | MPa | ASTM D882 |
| Dart Drop Impact (15 µm) | 200 | g | ASTM D1709 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| mPact™ D163 | Chevron Phillips Chemical Company LLC | mLLDPE | mPact™ |
| Andur 6500 DP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Kaneka MUH M3100 | Kaneka Corporation | ABS | Kaneka MUH |
| LUVOCOM® 1301-8956 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| SIBUR Synthetic Rubber NBR 3365 | SIBUR | NBR | SIBUR Synthetic Rubber |
