Order Products : sales@su-jiao.com
Indothene HD 52GB002
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Indothene HD |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xDluAV_Indothene-HD-52GB002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Indothene-HD 52GB002 is a High Molecular Weight High Density Polyethylene blow molding grade with balanced stiffness and impact strength produced by Stirred Tank Heavy Diluent (STHD) process adopting process know-how of M/s. Basell, Germany. It possesses broad molecular weight distribution, very good swell and excellent processability. Indothene-HD 52GB002 can readily be processed on most of HDPE blow moulding machines with accumulator. FOOD CONTACT APPLICATIONS : This grade shall meet the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It shall also conform to the positive list of constituents as approved in IS:10141:1982. The grade shall also comply with FDA regulation : CFR title 21 , 177.1520, Olefin polymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/10.0 kg | 0.80 | g/10 min | |
| 190°C/21.6 kg | 5.0 | g/10 min |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Compression Molded) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 3.20 mm, Compression Molded 2 | 12 | % | |
| Break, 3.20 mm, Injection Molded 3 | 600 | % | |
| Flexural Modulus 4(3.20 mm, Compression Molded) | 1050 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm, Compression Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 2 Temp. | 200 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 220 | °C | |
| Die Temperature | 215 | °C |
| Note Message | |
|---|---|
| 1 . | Type I |
| 2 . | Type I |
| 3 . | Type IV |
| 4 . | Type I |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TYNE® Olefins W7401 | Tyne Plastics LLC. | HDPE | TYNE® Olefins |
| Colorite G Series 8512G-015 | Colorite Polymers | PVC, Flexible | Colorite G Series |
| Cosmic DAP D45 | Cosmic Plastics, Inc. | DAP | Cosmic DAP |
| Elastron® V V100.A55.N | Elastron USA, Inc. | TPV | Elastron® V |
| SQUARE® LIM3600-70A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
