Order Products : sales@su-jiao.com
Marlex® 9519H
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xD1Kce_Marlex-9519H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® 9519H is a High Density (HMW) Polyethylene material. It is available in Latin America or North America for blow molding. Important attributes of Marlex® 9519H are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.34 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | 24.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 32.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 500 | % | ASTM D638 |
| Flexural Modulus - Tangent 3(Compression Molded) | 1480 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746A |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STABAMID® 25 JE 2 | Solvay Polyamide & Intermediates | Nylon 66 | STABAMID® |
| Starex ST-0185 | SAMSUNG SDI CO., LTD. | ABS | Starex |
| NOVALAC RX®849 | Vyncolit N.V. | Phenolic | NOVALAC |
| NYLOY® UB-0010N C45N2B | Nytex Composites Co., Ltd. | Nylon, Unspecified | NYLOY® |
| Akulon® Ultraflow K-FPG8 | DSM Engineering Plastics | Nylon 6 | Akulon® Ultraflow |
