Order Products : sales@su-jiao.com
K-Prene XL-A80
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Technovinyl Polymers India Ltd. |
| Trademark: | K-Prene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xC8Ndn_K-Prene-XL-A80.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| K-Prene XL-A80 is a Polypropylene + EPDM Rubber (PP+EPDM) material. It is available in Africa & Middle East. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set 1(23°C) | 20 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 3.30 | MPa | |
| 300% Strain | 5.00 | MPa | |
| Tensile Strength (Yield) | 8.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Tear Strength | 40.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 70°C, 22 hr | 45 | % | |
| 100°C, 22 hr | 55 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Ozone Resistance - 70 hrs | Pass |
| Note Message | |
|---|---|
| 1 . | 10 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TUFNYL® SGF 30 H NATURAL | SRF Ltd. | Nylon 6 | TUFNYL® |
| CoREZYN® COR30-DA-250 | Interplastic Corporation | Polyester, TS | CoREZYN® |
| CoolPoly® D5112 | Celanese Corporation | PPS | CoolPoly® |
| Envir® PA6G33VL-BK0801 | Barnet | Nylon 6 | Envir® |
| TEDUR® L 9406-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
