Order Products : sales@su-jiao.com

Teflon® PTFE 60 X

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	DuPont Fluoropolymers
Trademark:	Teflon® PTFE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	xAvMKK_Teflon-PTFE-60-X.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DuPont™ Teflon® PTFE 60 X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon® PTFE 60 X offers the excellent combination of properties typical of the Teflon® fluoroplastic resins: chemical inertness to nearly all industrial chemicals and solvents superior in-use thermal stability (low thermal instability index) exceptional dielectric properties, stable with frequency and temperature toughness and flexibility low coefficient of friction non-stick characteristics negligible moisture absorption excellent weather resistance service temperature up to 260 °C (500 °F) useful properties at -240 °C (-400 °F) moderate stiffness and high ultimate elongation Teflon® PTFE 60 X is designed for processing at low to medium reduction ratios of 10:1 to 300:1. It is designed to facilitate the production of high-quality, low-density tape and beading. Teflon® PTFE 60 X meets the requirements of ASTM D 4895-10, Type I, Grade 2, Class A.

Message

DuPont™ Teflon® PTFE 60 X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon® PTFE 60 X offers the excellent combination of properties typical of the Teflon® fluoroplastic resins:

chemical inertness to nearly all industrial chemicals and solvents

superior in-use thermal stability (low thermal instability index)

exceptional dielectric properties, stable with frequency and temperature

toughness and flexibility

low coefficient of friction

non-stick characteristics

negligible moisture absorption

excellent weather resistance

service temperature up to 260 °C (500 °F)

useful properties at -240 °C (-400 °F)

moderate stiffness and high ultimate elongation

Teflon® PTFE 60 X is designed for processing at low to medium reduction ratios of 10:1 to 300:1. It is designed to facilitate the production of high-quality, low-density tape and beading.

Teflon® PTFE 60 X meets the requirements of ASTM D 4895-10, Type I, Grade 2, Class A.

General Information
Features	Low friction coefficient Low hygroscopicity Rigid, good Solvent resistance Good electrical performance Good flexibility Good chemical resistance Good weather resistance Good toughness Extended tensile rate
Uses	Strap Sealant Seals
Agency Ratings	FDA 21 CFR 177.1550
Forms	Powder
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.18	g/cm³	ASTM D4894, ISO 12086
Apparent Density	0.50	g/cm³	ASTM D4894, ISO 12086
Average Particle Size
--	500	µm	ASTM D4894
--	500	µm	ISO 12086

Thermal	Nominal Value	Unit	Test Method
Thermal Instability Index
--			ISO 12086
--			ASTM D4894
Melting Temperature
-- ¹	327	°C	ISO 12086, ASTM D4894
-- ²	342	°C	ASTM D4894, ISO 12086

Extrusion instructions
Extrusion Pressure at RR=100:1 - 8 MPa according to ASTM D4895/ISO 12086

Note Message
1 .	Second
2 .	Initial

Resin Grade	Manufacturer	Category	Trademark
PRIMALENE WPP05PET	Southern Polymer, Inc.	PET	PRIMALENE
Xuchuan XCW-80MK(S)	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
Elastron® G G101.A73.N.C	Elastron USA, Inc.	SEBS	Elastron® G
Gravi-Tech™ GT6200-5002 X4 Black	PolyOne Corporation	Nylon 12	Gravi-Tech™
Lucky Enpla LGF5330	Lucky Enpla Co LTD	Nylon 6	Lucky Enpla