Order Products : sales@su-jiao.com
POLYCOMPO PE 2100JH
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xAW4lW_POLYCOMPO-PE-2100JH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 2100JH is a High Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Industrial Applications. Primary characteristic: good aesthetics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 9.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 16.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 62 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 21.0 | MPa | |
| Break, Injection Molded | 13.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | 310 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 810 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 122 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 131 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Ject® 6100-10 | Premix, Inc. | TS, Unspecified | Premi-Ject® |
| Santoprene™ 201-55 | ExxonMobil Chemical | TPV | Santoprene™ |
| TAROLOX 111 G4 DX02 | Taro Plast S.p.A. | PET | TAROLOX |
| Glastic® SG-200 | Glastic Corporation | Polyester, TS | Glastic® |
| Grilon® F 50 nat 6368 | EMS-GRIVORY | Nylon 6 | Grilon® |
